Deploying NetApp NFS Plug-in for VMware VAAI

December 29, 2014December 28, 2014 dvdmorera NetApp, NetApp&VMware integration, Storage, Virtualization, vSphere NetApp, NFS, VAAI, vSphere, vStorage

NetApp’s NFS plug-in for VMware VAAI (VMware vStorage API for Array Integration) is an API that allows for the offload of certain tasks from the physical hosts to the storage array. Tasks such as thin-provisioning and hardware acceleration can be done at the array level to reduce the workload on the ESXi hosts.

The steps necessary to deploy VAAI on ESXi hosts as well as the NetApp storage can be accomplished using VSC or ESXi CLI, as well as NetApp’s CLI/Shell. The nice thing about VSC is that it is capable of enabling VMware vStorage for NFS on the storage and also enables VAAI on the VMware hosts if not already done.

Prior to installing NetApp’s NFS plugin for VMware VAAI, NFS datastores cannot take advantage of offloading activities such as Hardware Acceleration.

In order to install and configure NetApp NFS Plug-in for VMware VAAI, the following steps are necessary:

Enable NFSv3 on the storage system. NFSv4 is necessary for C-Mode on the export policy for VAAI to work.
- Different methods to enable vStorage between 7-Mode and C-Mode
Have vSphere 5.0 or later
Download VAAI plug-in from NetApp site
Copy/Install bundle on ESXi host

Enabling VMware vStorage for NFS

VMware vStorage needs to be enabled on the NetApp storage controller. Since NetApp ONTAP 7-Mode and C-Mode commands are different, you will need to use the one for your array version.

7-Mode

“options nfs.vstorage.enable on

C-Mode

In 7-mode, the option is enabled “globally” at the controller level. In C-Mode, this option is enabled at the SVM (Storage Virtual Machine) aka vServer.

“vserver nfs modify –vserver <your SVM name> -vstorage enabled”

Verify that VAAI is enabled on the VMware hosts

By default, VAAI is enabled on vSphere 5.0 or later, but you can verify using the following commands from the host CLI.

“esxcfg-advcfg -g /DataMover/HardwareAcceleratedMove”

“esxcfg-advcfg -g /DataMover/HardwareAcceleratedInit”

If VAAI is enabled, the commands will return a 1 instead of 0.

If for some reason VAAI is not enabled on the ESXi host, you can enable them by using these commands:

“esxcfg-advcfg -s 1 /DataMover/HardwareAcceleratedInit’

“esxcfg-advcfg -s 1 /DataMover/HardwareAcceleratedMove”

You can also check these settings by using the Web GUI by selecting the host>Manage>Advanced System Settings.

Installing Plug-in via CLI

You can install the plug-in via VSC or CLI. When using CLI, you can choose to use the online bundle (.vib) or offline bundle (.zip). I will show the offline bundle installation.

After you have downloaded the offline bundle, copy the .zip file to a datastore available to your ESXi hosts.

You can verify the contents of the bundle by running “esxcli software sources vib list –d <path of your .zip file>”. In this example, the offline bundle is located in the root of a datastore available to this host.

From the ESXi CLI, run the following command to install the plug-in

“esxcli software vib install –n NetAppNasPlugin –d <path of your offline bundle>”

At this point, the NFS plug-in for VMware VAAI is installed. Remember that the host MUST be rebooted after installation, so either use vMotion to move you VMs, or schedule some down time after hours to complete the reboot.

Installing Plug-in via VSC

VSC simplifies this installation. Before you can install the plugin on an ESXi host, you will need to copy the .vib file from the offline bundle to the install directory of the VSC server. The default location is C:\Program Files\NetApp\Virtual Storage Console\etc\vsc\web. Also make sure that the name of the .vib file is NetAppNasPlugin.vib, if not, rename it so you don’t have to restart VSC or NVPF service. Don’t forget to reboot the ESXi host after installing the plugin.

VSC>TOOLS>NFS VAAI Tools >Install on Host>Select host and reboot.

After installing the NFS VAAI plug-in, NFS is now supported for Hardware Acceleration as well as other enhancements.

Deploying NetApp VASA Provider for VMware vSphere

December 23, 2014December 23, 2014 dvdmorera NetApp&VMware integration, Storage, Virtualization NetApp, VASA, VMware, vSphere

As I mentioned in previous posts, NetApp’s VASA Provider for VMware vSphere allows for the management of storage through profiles, and gears towards the Software Defined Data Center (SDDC) approach.

In order to deploy VASA provider, you will need to download the NetApp VASA provider for vSphere from NetApp’s support site. There is an ONTAP 7-Mode flavor and also an ONTAP C-Mode flavor, so choose the one that matches your environment. Deploy the virtual appliance (OVA) using VMware’s client and provide the necessary information for the virtual appliance. You will also need VSC already installed in order to register the VASA provider after installation and configuration.

During the first boot, VMware Tools installation prompt appears. Mount the VMware Tools and hit enter to install VMware tools and continue installation. Change the CD/DVD configuration on the virtual appliance to “Client Device”. Provide passwords for maintenance account (maint) and vpserver account when prompted. Use the vpserver account to register VASA with VSC from the VSC configuration page by providing the IP address of the VASA provider.

Configuration settings will appear after installation. Use the Web UI for normal use and the maintenance console (CLI) when the Web UI is not accessible. Note that the Web Console utilizes port 9083, so make sure to enter the correct TCP/IP socket when using the WEB UI.

At this point, VASA has been deployed and configured. All that is left to do is register the VASA Provider with vSphere via VSC, and enjoy the benefits of NetApp and VMware integration.

NetApp VSC, VASA, VAAI for VMware vSphere: Why do I need this?

December 22, 2014February 24, 2016 dvdmorera NetApp, NetApp&VMware integration, Storage, vCenter, Virtualization NetApp, VAAI, VASA, VSC, vSphere

In most software meetings, round tables, and customer reviews and councils I have been part of, the feedback has been about a common topic the majority of the time. Customers want to have a single location/interface to manage multiple products. Fortunately, some aspects of NetApp storage can be managed through VMware’s WEB UI by leveraging Virtual Storage Console (VSC), VASA provider, and VAAI for VMware.

VSC is a vCenter plug-in that delivers VM management for environments running NetApp storage. VSC allows for storage configuration and monitoring, datastore provisioning and VM cloning, online VM optimization as well as backup and recovery of VMs and datastores. VSC is a very useful and convenient tool that will give you a glance of your storage status and also allow you to optimize your VMs that have not been properly aligned by migrating them to another storage target and aligning the VMDKs properly.

VSC Main Page

VMDK alignment using VSC

The VASA provider for NetApp ONTAP is a virtual appliance that supports VMware’s VASA (vStorage APIs for Storage Awareness). It leverages VSC as the console and provides information to the vCenter about NetApp Storage that has been associated with VSC. VASA allows for the management of storage profiles defined as Service Level Objectives (SLO) as well as alarms to monitor the NetApp environment when aggregates and volumes are nearing their storage capacity.

The last piece of the puzzle is VAAI. VMware VAAI (vSphere Storage APIs – Array Integration) allows for hardware acceleration and offload certain operations that originally occurs at the host level, to the storage system. This reduces the overhead and consumption of resources on the ESXi host and improves performance. VAAI is great for speeding up I/O operations on the VMware side.

You could pick and choose which of these components to install as you see fit, but ideally you would want to deploy all three to take advantage of these enhancements and integration. The VSC software is installed on a server and associated with a specific vCenter. The NFS plug-in for VMware VAAI is installed on each VMware host and the VASA provider is deployed as a virtual appliance. It is important to point out that VSC can also be utilized to set NetApp’s recommended values on ESXi hosts for better performance.

@greatwhitetec

Virtualization, Storage, and other techy stuff

vSphere